JBL VTXV25-II Full Size 3-Way High-Directivity Line Array With Fixed Angle ASM Suspension


The VTX V25-II is a full size 3-way high-directivity line array element that includes a new 4th generation waveguide which improves long throw performance, wavefront control, and is an improved power match for the Crown IT4x3500HD. The transducer compliment for VTX V25-II is two 2000W 15″ Differential Drive® woofers mounted in die cast aluminum baffles, four 8″ Differential Drive midrange transducers firing through a patented (RBI Radiation Boundary Integrator®), and three revolutionary D2 Dual-Diaphragm Dual-Voice-Coil Compression Drivers loaded onto the newly designed waveguide. Patented rigging, Crown I-Tech HD amplification with BSS ® OmniDriveHD V5 Processing, and JBL HiQnet Performance Manager™ configuration and control software complete the system package.

SKU: VTX-V25-II Categories: , , , Tags: , ,



  • New 4th Generation HF Waveguide technology
  • Revolutionary D2 Dual Diaphragm, Dual Voice Coil Compression Driver
  • JBL’s patented RBI (Radiation Boundary Integrator®)
  • Cardioid-Arrayable Subwoofer Enclosure Models
  • Aluminum front baffles for reduced cabinet height, weight and improved heat transfer
  • Patented JBL S.A.F.E.™ Suspension System
  • V5 Processing with Crown I-Tech HD or VRACK
  • JBL HiQnet Performance Manager™ System Configuration and Control
  • Available with either fixed angle tension suspension (V25-II) or compression suspension (V25-II-CS) hardware

The revolutionary D2 Dual Driver dramatically improves the sound and performance of high frequencies, providing an extreme output advantage over conventional systems with significantly higher array power, reduced distortion, double the number of voice coils and more than double the power handling. This results in a dramatic increase in pure high frequency sound pressure levels in the same physical footprint with a 30% reduction in weight.



Improved Wavefront Control

The V25‐II waveguide provides better acoustic loading conditions for the D2 driver, resulting in 10 dB higher sensitivity above 10 kHz.


Enhanced Performance and Dramatically Reduced Driver Weight

JBL’s exclusive dual voice coil, dual magnetic gap Differential Drive technology is at the core of all VTX models, dramatically reducing driver weight while greatly enhancing all critical performance parameters: frequency response, power output and distortion.

VTX S.A.F.E™ Suspension & Laser setup

Next Generation Line Array System Solutions.

JBL’s patented S.A.F.E suspension system is streamlined for speed and efficiency with improved hardware for faster setup with fewer pinning operations and greater security.

ystem Integration and Management

With the VTX Series you are not just using a product, you are gaining access to an expert system. Tools for system design and all the components to analyze, configure, set up and control a VTX system are all part of the JBL commitment to total system integration and support. The goal is maximum efficiency and the highest possible level of performance in any venue, anywhere in the world.


System Type Full Size 3-Way High Directivity Line Array Element with D2 Dual Drivers
Components 2 x 2267H 15″ Differential Drive® LF 4 x 2169H 8″ Differential Drive® MF 3 x 2430K D2 Dual Driver
Horizontal Coverage (-6 dB) 90 degrees nominal (300 – 16k Hz)
Frequency Response (-10dB) 35 – 18k Hz
Nominal Impedance LF = 2 x 8 ohms
MF = 1 x 8 ohms
HF = 1 x 8 ohms
Continuous Power Rating (Active Mode) 2 x 2000W LF, 1400W MF, 600W HF
Dimensions (H x W x D) 1223mm x 414mm x 614mm (48.2in x 16.3in x 24.2in)
Net Weight (each) 82.6 kg (182 lb)
Maximum Peak Output *2 141 dB (Preset: VTX V25-II)
LF Driver 2 x 381 mm (15 in) dia., 100mm (4 in) Dual Voice Coil, Neodymium Differential Drive®, Direct Cooled™
MF Driver 4 x 203 mm (8 in) dia., 76mm (3 in) Dual Voice Coil, Neodymium Differential Drive®, Direct Cooled™
HF Driver 3 x Dual Diaphragm Dual Voice Coil Compression Driver, 76 mm (3 in) dia. dual voice coils, 38 mm (1.5 in) exit
Enclosure Cast aluminum front baffle. 18 mm, 11-ply Finnish birch plywood; black DuraFlex™ finish; integral recessed handles
Suspension / Mounting Fixed angle ASM suspension system: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 degree inter-enclosure angle options
Inter-enclosure Angle 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10