- Video shielded for use near video monitors.
- Extremely smooth frequency response.
- Stainless steel grill for harsh environments.
- 60 W transformer for 70 V or 100 V lines, with 8 ohms thru.
- SonicGuard™ overload protection.
- 130 mm (5.25 in) polypropylene coated woofer, 10 mm (.75 in) titanium coated horn-loaded tweeter.
- Includes InvisiBall® mounting hardware and sealed input panel cover.
- Screw-down input terminals.
- 100° x 100° high frequency horn.
|Frequency Range||70 Hz – 23 kHz (-10 dB)|
|Power Capacity||200 W Continuous Program Power; 100 W Continuous Pink Noise|
|Transformer Taps||70V: 60 W, 30 W, 15 W, 7.5 W 100V: 60 W, 30 W, 15 W|
|Sensitivity (1W, 1m)||87 dB SPL, 1 W @ 1 m (3.3 ft)|
|Midrange (±1.5 dB, typical)||130 Hz – 14 kHz|
|Coverage Angle||100° x 100°|
|Maximum SPL (1m)||113 dB continuous peak pink noise 107 dB continuous average pink noise 103 dB continuous average music or speech|
|Directivity Factor (Q)||4.9 dB, averaged 500 Hz to 4 kHz|
|Directivity Index (DI)||6.9 dB, averaged 500 Hz to 4 kHz|
|Minimum Impedance||6.7 ohms at 230 Hz|
|Crossover Network||Second Order Low Pass, Second Order High Pass, Complex Optimization for Maximally Flat Response|
|Drivers||LF: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
HF: 20 mm (.75 in) titanium coated PEI
|Enclosure||High Impact polystyrene|
|Grille||Painted stainless steel, black or white to match cabinet, paintable|
|Overload Protection||Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition|
|Outdoor Capability||Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating|
|Input Connectors||Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)|
|Safety Agency||Transformer is listed per UL1876|
|Colors||Black or white (-WH)|
|Rotation||Against wall on InvisiBall Base: 37° vertical 44° horizontal On bracket: 44° all directions|
|Dimensions (H x W x D)||236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)|
|Net Weight (each)||4.0 kg (9 lb)|
|Shipping Weight (ea)||9.0 kg (20 lb) per pair|
|Included Accessories||1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench|
|Optional Accessories||MTC-25V: For vertical columnar orientation of up to 3 loudspeakers extension of the woofer surround that MTC-25/23H: For horizontal splaying of two speakers. Three brackets array up to six loudspeakers in a 360° array. MTC-28/25CM: Ceiling-mount adapter.|
|Mounting Hardware||InvisiBall™ aimable wall-mounting system included.|